> ## Content Index
> Fetch the complete content index at: https://blenderpro.net/llms.txt
> Use this file to discover other available public pages before exploring further.

# Blender for 3D printing: model, check and export a printable file
- URL: https://blenderpro.net/blender-3d-printing/
- Published: 2026-11-01T21:19:41.000Z
- Updated: 2026-11-15T14:27:50.000Z
- Description: Blender for 3D printing in 5.2 LTS: three unit routes that make an STL read in millimetres, built-in checks for non-manifold edges, normals and thin walls, the 3D Print Toolbox extension, the fixes for each finding, STL export settings, and the slicer comparison that proves the size.
- Author: Alex Rowan
- Tags: Import & export

To 3D print a Blender model, give the mesh a real size and a closed material boundary, export the selected geometry as STL, then inspect its sliced layers before printing. For a print-only scene, I'd use Metric, Unit Scale **0.001** and Millimeters, with STL Scale **1** and Scene Unit **off**: one coordinate unit then becomes one millimetre in the usual slicer workflow. The final check is that the slicer retains your intended size, walls, openings and supported layers.

The controls below follow Blender 5.2\. You'll make a small open-top cup, check the geometry, and follow its dimensions into a slicer. An existing STL can enter the same process at [the import step](#import-stl).

## What Blender does in a printing workflow

Blender makes and edits the surface mesh. A slicer turns that geometry into instructions for the selected printer, nozzle or resin process. Exporting an STL doesn't choose layer height, generate machine instructions or prove that the object can support its own next layer.

I'd choose Blender for sculpted shapes, decorative parts and editing an existing mesh. For a family of mechanical parts whose screw spacing, fits and dimensions must remain linked through revisions, a parametric CAD workflow is usually easier to maintain. Blender can use exact dimensions; the distinction is how you manage the next change. That trade-off appears in this [Bambu Lab discussion of mesh editing, modifiers and parametric revisions](https://forum.bambulab.com/t/recommended-training-to-get-to-know-blender-for-3d-printing/92134?ref=blenderpro.net).

Have the printer or service's material limits available, save a `.blend` before destructive repair, and keep the unmodified model. Shortcuts use Blender's default keymap with the pointer over the 3D Viewport; the menu paths work without a numpad. If framing the part is the first obstacle, use [Frame Selected and the viewport navigation controls](https://blenderpro.net/move-around-blender-viewport/).

## Choose one units route before modelling

[Scene Properties › Units](https://docs.blender.org/manual/en/5.2/scene%5Flayout/scene/properties.html?ref=blenderpro.net) controls the conversion between stored coordinates and displayed measurements. Changing Unit Scale doesn't resize the underlying geometry. Length chooses the displayed unit; setting it to Millimeters alone doesn't make STL coordinates millimetres.

STL describes a surface with triangle coordinates rather than a scene's unit settings, as the [Library of Congress's binary STL description](https://www.loc.gov/preservation/digital/formats/fdd/fdd000505.shtml?ref=blenderpro.net) shows. Agree on millimetres with the slicer or upload service, then use one of these routes:

| Route                           | Blender scene                                        | For a 20 mm length                    | STL export                                     |
| ------------------------------- | ---------------------------------------------------- | ------------------------------------- | ---------------------------------------------- |
| A: print-only scene             | Metric; Unit Scale 0.001; Length Millimeters         | Stored length 20; displayed 20 mm     | Scale 1; Scene Unit off                        |
| B: keep an existing metre scene | Metric; Unit Scale 1; Length Millimeters for display | Stored length 0.02; displayed 20 mm   | Scale 1000; Scene Unit off                     |
| C: toolbox export               | Either Metric scene above                            | The correct displayed physical length | 3D Print Toolbox › Export › Units: Millimeters |

For route A, open **Properties › Scene › Units** and set those three values now. The native STL exporter multiplies world-space coordinates by its Scale, and also by Unit Scale when Scene Unit is enabled; its [export transformation](https://raw.githubusercontent.com/blender/blender/v5.2.3/source/blender/io/stl/exporter/stl%5Fexport.cc?ref=blenderpro.net) explains why Scene Unit must stay off here. With route A, enabling it writes 20 × 0.001 = 0.02 instead of 20.

![Blender Properties editor on the Scene tab with the Units panel set to Metric, Unit Scale 0.001 and Length Millimeters.](https://storage.ghost.io/c/26/4b/264ba59d-7285-4985-aa4e-79f539dc71dc/content/images/2026/11/21-blender-ui-blender-3d-printing-0-da6b0d2ba304.webp)

For route A, set Metric, Unit Scale 0.001 and Length Millimeters. A coordinate length of 20 then displays as 20 mm. [Open at full size](https://storage.ghost.io/c/26/4b/264ba59d-7285-4985-aa4e-79f539dc71dc/content/images/2026/11/21-blender-ui-blender-3d-printing-0-da6b0d2ba304.webp?ref=blenderpro.net).

Don't switch an already correctly sized metre-based model from Unit Scale 1 to 0.001 and expect its dimensions to stay put. A stored length of 0.02 will now display as 0.02 mm. Keep route B, or deliberately resize a saved copy and verify every required dimension. Keep the relationship between displayed measurements and stored coordinates consistent throughout the file.

## Make a 20 mm cup with real walls

This teaching model has outer dimensions **20 × 20 × 12 mm**, walls **1.2 mm** thick and a **1.2 mm** base. Those are example design dimensions, not universal printer minima. If your chosen process needs thicker walls, change the design before printing.

1. **Start with one cube in route A.** In Object Mode choose Add › Mesh › Cube, or select the untouched default cube. Open View › Sidebar (N), Item › Transform, and enter Dimensions X `20 mm`, Y `20 mm`, Z `12 mm`. Keep its rotation at zero for this example. [Dimensions measures the bounding box along the object's local axes](https://docs.blender.org/manual/en/5.2/scene%5Flayout/object/properties/transforms.html?ref=blenderpro.net).
2. **Apply its scale.** Choose Object › Apply › Scale (Ctrl+A, Scale). Check Scale is 1 on each axis and Dimensions still reads 20 × 20 × 12 mm. Apply Scale transfers the scale into the mesh while preserving the visible size; [it can affect modifiers and parenting](https://docs.blender.org/manual/en/5.2/scene%5Flayout/object/editing/apply.html?ref=blenderpro.net), so do this on the simple cube before adding dependent operations.
3. **Select only the top face.** Enter Edit Mode (Tab), enable Face Select with its header button or 3 on the number row, turn X-Ray off, and choose Select › None. Click the upward-facing top of the cube. Keep Proportional Editing off.
4. **Create the rim.** Choose Face › Inset Faces (I), type `1.2 mm` and confirm. In Adjust Last Operation, use Thickness 1.2 mm, Depth 0, Offset Even on, and Offset Relative, Outset and Select Outer off. [Inset creates the surrounding border faces](https://docs.blender.org/manual/en/5.2/modeling/meshes/editing/face/inset%5Ffaces.html?ref=blenderpro.net); the smaller centre face should remain selected.
5. **Lower the inner floor.** Choose Face › Extrude Faces (E), press Z for the global vertical axis, type `-10.8 mm` and confirm. This leaves 12 − 10.8 = 1.2 mm beneath the cavity. [Extrude creates connecting faces](https://docs.blender.org/manual/en/5.2/modeling/meshes/editing/face/extrude%5Ffaces.html?ref=blenderpro.net), so the inner walls join the rim and floor. If you cancel its movement, undo the extrusion too: cancelling movement alone leaves newly created geometry in place.
6. **Inspect the intended shape.** The opening measures 20 − 2 × 1.2 = 17.6 mm on each side, and the cavity is 10.8 mm deep. Keep the top open. Save the file, then run the mesh checks below.

![Top view and section of an open cup: the rim connects its inner and outer walls, and the base joins the walls around the cavity](https://storage.ghost.io/c/26/4b/264ba59d-7285-4985-aa4e-79f539dc71dc/content/images/2026/11/blender-printable-cup-boundary-c4536e1f3222.webp)

The cavity stays open while the rim, walls and base form a continuous material boundary. Repair missing faces without capping the intended opening. [Open the cup boundary at full size](https://storage.ghost.io/c/26/4b/264ba59d-7285-4985-aa4e-79f539dc71dc/content/images/2026/11/blender-printable-cup-boundary-c4536e1f3222.webp?ref=blenderpro.net).

**An open cavity is compatible with a closed material boundary.** The outer surface, rim, inner walls and floor form one continuous skin around the material. Deleting a single top face without constructing inner walls leaves a zero-thickness surface with an exposed boundary. Filling the cup's intended opening would make a different object.

For a surface you've already modelled, [Solidify adds thickness and can join the inner and outer surfaces with Rim › Fill](https://docs.blender.org/manual/en/5.2/modeling/modifiers/generate/solidify.html?ref=blenderpro.net). Apply non-uniform object scale first: its thickness uses local coordinates. Even Thickness is an approximation, so measure the final wall instead of treating the modifier's number as a guarantee at every corner.

### Leave clearance when a second part must fit

A plug and opening with identical nominal dimensions leave no designed clearance. Decide whether the parts must slide, rotate or hold a friction fit, then allow a deliberate gap between their mating surfaces. [Prusa's tolerance guidance](https://help.prusa3d.com/article/modeling-with-3d-printing-in-mind%5F164135?ref=blenderpro.net) ties the appropriate gap to geometry, orientation, calibration, settings and material, so a correct 20 mm bounding box doesn't by itself establish a working fit.

For example, a centred 17.2 mm square insert in this cup's 17.6 mm opening leaves (17.6 − 17.2) ÷ 2 = 0.2 mm on each side. This is gap arithmetic, not a universal fit setting. I'd print a short mating section with the final material, profile and orientation before committing to a larger part, then revise the relevant surfaces instead of scaling the whole assembly.

## Bring an existing STL into the same workflow

If the source says a part is 20 mm wide, use that known dimension as your import check. Preserve the original STL and import a working copy through **File › Import › STL (.stl)**. For the route A scene, use **Scale 1, Scene Unit off, Forward Y and Up Z**; keep **Validate Mesh** on. These are the [native STL import controls](https://docs.blender.org/manual/en/5.2/files/import%5Fexport/stl.html?ref=blenderpro.net).

A file whose coordinate width is 20 then enters as 20 Blender units and displays as 20 mm. In Object Mode select it, open Sidebar › Item, and verify the known dimension before editing. If you can't see it, choose View › Frame Selected. If the file has no trustworthy reference dimension, don't infer physical size from its on-screen appearance.

For route B, a millimetre STL needs **import Scale 0.001 with Scene Unit off**: the same 20 becomes 0.02 stored units and displays as 20 mm. Exporting at Scale 1000 restores the coordinate width of 20\. Blender's [import transform also divides by Unit Scale when Scene Unit is enabled](https://raw.githubusercontent.com/blender/blender/v5.2.3/source/blender/io/stl/importer/stl%5Fimport.cc?ref=blenderpro.net); leave that option off in these explicit routes to avoid combining two conversions.

STL arrives as a triangulated surface. It doesn't restore the original CAD sketches, constraints or Blender modifier stack. Resize or edit the mesh as needed, then repeat the thickness and slicing checks: stretching a cup sideways can change its walls as well as its outer size.

## Check the exact geometry you intend to export

For the cup above, the mesh itself is the finished shape. For a part made with Boolean, Solidify, Decimate or other geometry-changing modifiers, Edit Mode and many toolbox checks can read the base mesh instead. A clean base doesn't establish that the generated result is clean.

In Object Mode make a normal duplicate with Object › Duplicate Objects (Shift+D), then cancel its movement so it stays in place. Name it `Print-check`, keep the original separately, and hide the original while inspecting the copy. Select only the copy and choose **Object › Apply › Visual Geometry to Mesh** to [freeze the visible result into mesh data](https://docs.blender.org/manual/en/5.2/scene%5Flayout/object/editing/apply.html?ref=blenderpro.net). Inspect this copy, and later export only it. For Geometry Nodes that outputs instances, [realize those instances as mesh geometry](https://docs.blender.org/manual/en/5.2/modeling/geometry%5Fnodes/instances/realize%5Finstances.html?ref=blenderpro.net) before relying on this mesh-only check.

### Find exposed boundaries and invalid joins

Enter Edit Mode, choose Vertex or Edge Select, clear the selection with Select › None, then choose **Select › Select All by Trait › Non Manifold**. [This command is available in Vertex and Edge selection modes](https://docs.blender.org/manual/en/5.2/modeling/meshes/selecting/all%5Fby%5Ftrait.html?ref=blenderpro.net). Adjust Last Operation splits the findings into Wire, Boundaries, Multiple Faces, Non Contiguous and Vertices.

For our intended closed material boundary, investigate any selected geometry. The cup's correctly connected rim shouldn't be an exposed boundary; a missing strip between inner and outer walls should. Use the individual checkboxes to distinguish a hole from a wire edge or a junction with too many faces. An empty selection means this check found none of the enabled problems; it doesn't verify wall thickness or print strength.

![Blender Edit Mode with the edges around a bracket's open end selected by Non Manifold and the Select Non-Manifold panel at the bottom left.](https://storage.ghost.io/c/26/4b/264ba59d-7285-4985-aa4e-79f539dc71dc/content/images/2026/11/21-blender-ui-blender-3d-printing-1-2098a841ea54.webp)

Non Manifold selects the exposed boundary at this bracket’s open end. For an intended closed material boundary, investigate that selection before filling or rebuilding anything. [Open at full size](https://storage.ghost.io/c/26/4b/264ba59d-7285-4985-aa4e-79f539dc71dc/content/images/2026/11/21-blender-ui-blender-3d-printing-1-2098a841ea54.webp?ref=blenderpro.net).

### Check which side of each face points out of the material

Enable **Face Orientation** in the viewport Overlays popover. [Back-facing surfaces appear red](https://docs.blender.org/manual/en/5.2/editors/3dview/display/overlays.html?ref=blenderpro.net). Inspect both the exterior and inside the cup: outward from the material includes pointing into its empty cavity.

For inconsistent orientation, select the relevant mesh in Edit Mode and use **Mesh › Normals › Recalculate Outside** (Shift+N), then inspect again. [Recalculate doesn't require a closed volume](https://docs.blender.org/manual/en/5.2/modeling/meshes/editing/mesh/normals.html?ref=blenderpro.net), so success here isn't proof that holes have been repaired. Flip only a deliberately chosen face when the automatic result doesn't match the intended inside and outside.

### Measure the walls, not just the outer box

Use Toolbar › Measure to inspect the 1.2 mm walls and base. Hold Ctrl while moving a ruler endpoint to snap it; Shift measures between faces and [works best with parallel faces](https://docs.blender.org/manual/en/5.2/editors/3dview/toolbar/measure.html?ref=blenderpro.net). Measuring only the outer 20 mm dimension can't reveal a thin inner wall.

In Edit Mode and Solid shading, enable **Mesh Analysis** in the mesh-edit overlays and choose Thickness. Set its Minimum near zero and Maximum to your required minimum thickness. [Geometry outside the displayed range is grey](https://docs.blender.org/manual/en/5.2/modeling/meshes/mesh%5Fanalysis.html?ref=blenderpro.net); coloured areas within it deserve inspection. This is a ray-based diagnostic, with limitations on dense meshes and modifier display, rather than a manufacturing certificate.

## Use 3D Print Toolbox with a deliberate threshold

[3D Print Toolbox](https://extensions.blender.org/add-ons/print3d-toolbox/?ref=blenderpro.net) provides geometry checks, measurements and export tools. In Blender 5.2 install it through **Edit › Preferences › Get Extensions**: search its name and choose Install. Online installation needs [Allow Online Access in Preferences › System › Network](https://docs.blender.org/manual/en/5.2/editors/preferences/system.html?ref=blenderpro.net). For an offline package, use [Install from Disk in the top-right drop-down](https://docs.blender.org/manual/en/5.2/editors/preferences/extensions.html?ref=blenderpro.net). Old instructions to enable a bundled copy in Add-ons don't describe this installation route.

Select the checked mesh, open the viewport Sidebar (N), then **3D Print › Analyze**. Set **Minimum Thickness** before Check All. On route A, the [stored default of 0.001](https://projects.blender.org/api/v1/repos/extensions/print3d%5Ftoolbox/raw/source/preferences.py?ref=main) means only 0.001 mm, not 1 mm. Type an explicit physical value, including `mm`, and read it back.

For example, if your chosen process requires at least 1 mm, enter `1 mm`; the example cup's nominal 1.2 mm wall then has a 0.2 mm design margin. That arithmetic doesn't establish a suitable limit for your printer, material or load. FDM toolpaths can vary their width: [Prusa's Arachne documentation distinguishes variable extrusion width from Minimum feature size](https://help.prusa3d.com/article/arachne-perimeter-generator%5F352769?ref=blenderpro.net), below which a feature is omitted.

| Check                   | What to investigate                                           | What the result doesn't decide                                   |
| ----------------------- | ------------------------------------------------------------- | ---------------------------------------------------------------- |
| Solid                   | Non-manifold edges and inconsistent face connections          | Wall strength, adequate thickness or a correct intended shape    |
| Intersections           | Surfaces crossing each other                                  | Which overlapping pieces you meant to unite or keep separate     |
| Degenerate / Non-Planar | Near-zero geometry or non-flat faces, using the chosen limits | A universal requirement for an all-quad mesh                     |
| Thickness               | Faces detected below your typed threshold                     | Every unsampled local thin spot or material strength             |
| Sharp / Overhang        | Thin pointed regions and downward-facing geometry             | Your printer's support-free angle or final support strategy      |
| Shells                  | Unexpected disconnected mesh islands                          | That several intentionally separate printable parts are a defect |

The [geometry checks use the active object](https://projects.blender.org/api/v1/repos/extensions/print3d%5Ftoolbox/raw/source/operators/analyze.py?ref=main); selecting several doesn't combine them into one checked solid. Volume and Area, by contrast, total selected objects. Most geometry checks use the base mesh, while Volume, Area and Shells evaluate modifier results. The frozen-copy method keeps those inputs consistent. In Edit Mode, click a geometry result to select its location; rerun the check after editing so its report matches the current mesh.

## Repair the finding while preserving the design

Save first, isolate the cause, make one repair and rerun the same check. I'd inspect a local boundary before using Make Manifold, because automatic cleanup can't know whether an opening is an accidental tear, the cup's intended cavity or clearance between parts.

- **An accidental hole:** select only its boundary, then use Mesh › Clean Up › Fill Holes, or construct the missing surface deliberately. [Sides limits which holes Fill Holes will close; zero allows all sizes](https://docs.blender.org/manual/en/5.2/modeling/meshes/editing/mesh/cleanup.html?ref=blenderpro.net). Don't select every boundary and cap the intended shape indiscriminately.
- **A seam that should be welded:** select the nearby duplicate vertices and use Mesh › Clean Up › Merge by Distance. Keep its distance smaller than any intended nearby gap and leave Unselected off unless you deliberately need unselected vertices included. Inspect the rim and wall thickness; undo if separate surfaces collapse together.
- **Interior faces or crossing shells:** decide which volume is intended before deleting. Select All by Trait › Interior Faces can include ordinary neighbours too, so inspect the selected faces. Joining objects with Object › Join doesn't perform a geometric union. A [Boolean Union removes the interior between combined volumes](https://docs.blender.org/manual/en/5.2/modeling/modifiers/generate/booleans.html?ref=blenderpro.net); validate the result on a copy.
- **A thin wall:** move or rebuild its inner surface, or adjust Solidify on the source and make a fresh check copy. Don't enlarge the entire cup merely to thicken a wall if the 20 mm outer dimension must remain fixed.
- **Near-zero edges or faces:** use a deliberately limited cleanup selection and threshold, then rerun Degenerate. A large merge distance can erase real details as easily as duplicate points.

**Make Manifold is a broad destructive operation.** Its [cleanup sequence selects the whole mesh, deletes, merges and fills geometry](https://projects.blender.org/api/v1/repos/extensions/print3d%5Ftoolbox/raw/source/operators/cleanup.py?ref=main). Use a disposable duplicate, compare dimensions, openings and thin regions with the source, and keep it only if the intended construction survives. A zero error count after a changed design is insufficient.

For a dense sculpt or scan, [reduce polygons with Decimate](https://blenderpro.net/blender-decimate-reduce-polygons/) only as far as its silhouette, small holes and minimum walls allow, then check the final result again. Smooth shading changes how the surface looks; the STL still contains actual triangles. Keep enough geometry for the desired curves instead of expecting smooth shading to remove visible facets from a print.

## Export the checked mesh as STL

Return to **Object Mode**, deselect other objects and select only the checked cup or `Print-check` copy. Choose **File › Export › STL (.stl)**, pick a destination and a new filename, and inspect the right-hand options. An export preset may retain earlier choices, so read these fields each time:

| Setting            | Route A choice                          | Reason                                                  |
| ------------------ | --------------------------------------- | ------------------------------------------------------- |
| ASCII / Batch      | Off / Off                               | One binary STL; no separate file per object             |
| Selection Only     | On                                      | Exclude the source, cutters and other scene objects     |
| Scale / Scene Unit | 1 / Off                                 | Write the 20 mm width as coordinate span 20             |
| Forward / Up       | Y / Z                                   | Keep these Blender axes for the initial size comparison |
| Apply Modifiers    | On                                      | Export evaluated geometry when modifiers remain         |
| Properties         | Choose deliberately: Render or Viewport | Use the intended visibility and modifier settings       |

[![Blender STL export options with Selection Only on, Scale 1.000, Scene Unit off, Forward Y, Up Z, Apply Modifiers on and Properties set to Render.](https://storage.ghost.io/c/26/4b/264ba59d-7285-4985-aa4e-79f539dc71dc/content/images/2026/11/21-blender-ui-blender-3d-printing-2-5aeb65b5232d.webp)](https://storage.ghost.io/c/26/4b/264ba59d-7285-4985-aa4e-79f539dc71dc/content/images/2026/11/21-blender-ui-blender-3d-printing-2-5aeb65b5232d.webp?ref=blenderpro.net)

Route A uses Selection Only on, Scale 1 and Scene Unit off. Apply Modifiers includes the evaluated mesh; Properties selects Render or Viewport settings. [Open at full size](https://storage.ghost.io/c/26/4b/264ba59d-7285-4985-aa4e-79f539dc71dc/content/images/2026/11/21-blender-ui-blender-3d-printing-2-5aeb65b5232d.webp?ref=blenderpro.net).

[Apply Modifiers exports the evaluated mesh](https://docs.blender.org/manual/en/5.2/files/import%5Fexport/stl.html?ref=blenderpro.net); you don't have to destroy the original stack merely to include it. Blender 5.2's Properties option defaults to Render. If you've checked the live viewport result but the render subdivision level or visibility differs, select Viewport or make both states agree. Export a frozen copy with no remaining modifiers for the simplest match. For a Multiresolution sculpt, switch to Object Mode before using Viewport export.

The Viewport/Render selector was [added for STL in Blender 5.2](https://developer.blender.org/docs/release%5Fnotes/5.2/pipeline%5Fio/?ref=blenderpro.net). Blender 4.5 has no such selector; a frozen mesh copy is the clearest way to keep its export geometry consistent with your check. Route B uses the same selection and geometry checks but **Scale 1000**.

For route C, select the checked part and open **Sidebar › 3D Print › Export**. Choose an Export Directory, Format STL, Options › Units **Millimeters**, and ASCII off, then Export. The [toolbox exporter converts the scene scale to millimetres](https://projects.blender.org/api/v1/repos/extensions/print3d%5Ftoolbox/raw/source/operators/export.py?ref=main), exports selected objects with modifiers, and requests Viewport evaluation for STL in 5.2\. Its units choice replaces the native Scale calculation; don't add another factor of 1000.

STL carries geometry rather than your Blender materials, UV workflow or slicer project settings. If a service specifically requires OBJ or 3MF, use that delivery path and verify its units and contents separately. It isn't necessary to change format for this single-part geometry check.

## Confirm size, walls and layers in the slicer

Open the actual exported file in your slicer. First select the correct printer, nozzle and material profile; don't let an automatic fit-to-bed operation hide a scale mistake. For the unrotated cup, with no slicer scaling, check the size reads **20 × 20 × 12 mm**. If you've changed orientation, compare the corresponding axes or temporarily return to the original orientation.

Then slice and inspect the **layer preview**, not just the solid model view. In [PrusaSlicer's print walkthrough](https://help.prusa3d.com/article/first-print-with-prusaslicer-3-0-0%5F1079761?ref=blenderpro.net), Slice generates the printer instructions and Preview exposes individual layers with the vertical slider. Use the equivalent preview in your chosen slicer:

1. **At the base:** the cup has a continuous floor attached to the bed. Inspect the planned material and first-layer footprint, not merely the visible outside shell.
2. **Above the floor:** the layers should form a connected square ring around an empty cavity. Missing stretches of wall or completely empty layers require a return to the geometry or relevant thin-feature settings.
3. **At the top:** the cavity should still be open. Unexpected fill, a lid or missing rim means the delivered geometry or slicing setup doesn't match the design.
4. **Under overhangs:** confirm that new material has a viable surface, bridge or support beneath it. The cup's simple upright walls avoid the added problem of a sculpted overhang; another model may need reorientation, supports or redesign.

If a thin feature disappears, investigate its actual thickness and the slicer's minimum-feature and perimeter settings. [Arachne can vary line width and has its own minimum-feature settings](https://help.prusa3d.com/article/arachne-perimeter-generator%5F352769?ref=blenderpro.net); enabling a generic thin-wall switch isn't a universal repair. For resin, use the selected process's wall and support requirements. A hollow resin part also needs a way for uncured resin to leave its cavity, as [Prusa's hollowing and drainage guidance](https://help.prusa3d.com/article/hollowing%5F117285?ref=blenderpro.net) explains; an FDM nozzle-width rule doesn't cover that problem.

Finally retain the source `.blend`, the checked export and the slicer project together. Regenerate and recheck the export after a geometry or scale change. A geometrically valid mesh and a sensible preview establish the digital handoff; the selected material, orientation and printer process still determine the physical result.

## Find the cause when Blender and the slicer disagree

| Symptom                                     | First check                                                    | Corrective action                                                        |
| ------------------------------------------- | -------------------------------------------------------------- | ------------------------------------------------------------------------ |
| 20 mm becomes 0.02 mm                       | Route B exported at Scale 1, or route A used Scene Unit        | Re-export with the matching units route; verify 20 mm before slicing     |
| 20 mm becomes 20,000 mm                     | Route A also used export Scale 1000                            | Return native export Scale to 1                                          |
| Import size is wrong                        | Known source dimension and import Scale/Scene Unit             | Use route A's Scale 1/off or route B's 0.001/off for a millimetre STL    |
| Other parts appear in the file              | Selection and Selection Only                                   | Select only the checked object and export again                          |
| Curves are faceted                          | Actual mesh outline and subdivision/export state               | Restore sufficient geometry; smooth shading alone won't change triangles |
| Toolbox is clean but exported shape differs | Base mesh versus evaluated copy; Properties choice             | Check and export the same frozen result or matching modifier state       |
| Walls or layers disappear                   | Final wall geometry, intersections and slicer minimum features | Repair or thicken the affected region, then reslice and inspect          |
| Repair closes the intended opening          | Filled boundaries and cleanup selection                        | Undo; construct the continuous rim and walls without capping the cavity  |